GIỎ HÀNG : 0 SẢN PHẨM

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

Hỗ trợ kỹ thuật

Hỗ trợ kỹ thuật

Thống kê

Đang online93
Hôm nay107
Hôm qua128
Trong tuần235
Trong tháng2,926
Tổng cộng264,605

Proface PFXGP4601TADR

Giá : Hotline: 0946.733.151

Mã sản phẩm : PFXGP4601TADR

Bảo hành : 12 tháng

Xuất xứProface

Standard product information Family HMI Series GP4000R Series Size 12" Model PFXGP4601TADR Global Code PFXGP4601TADR Product Features Rear Mount 12" DC Analog Repair Status ✔ (Repair service is available, reparable.)

Standard product information
Family 
HMI
Series 
GP4000R Series
Size 
12"
Model 
PFXGP4601TADR
Global Code 
PFXGP4601TADR
Product Features 
Rear Mount 12" DC Analog
Repair Status 
✔ (Repair service is available, reparable.)
Display specifications
Display type 
TFT Color LCD
Display size 
12.1"
Resolution 
800 x 600 pixels (SVGA)
Effective display area 
W246.0 x H184.5 mm [W9.69 x H7.26 in.]
Display colors 
65,536 Colors (No blink) / 16,384 Colors (Blink)
Backlight 
White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 
16 Levels (Adjusted with touch panel or software)
Touch panel type 
Resistive Film (analog)
Touch panel resolution 
1,024 x 1,024
Touchpanel lifetime 
1,000,000 times or more
Language fonts 
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable.)
Character sizes 
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font sizes 
Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1
8 x 8 dots 
100 char. x 75 rows
8 x 16 dots 
100 char. x 37 rows
16 x 16 dots 
50 char. x 37 rows
32 x 32 dots 
25 char. x 18 rows

1Other font sizes can be set up with the Editor software.

Electrical specifications
Rated input voltage 
24 Vdc
Input voltage limits 
19.2 to 28.8 Vdc
Allowable voltage drop 
10 ms or less
Power consumption 
17 W or less
In-rush current 
30 A or less
Voltage endurance 
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance 
500 Vdc, 10 MΩ or more (between charging and FG terminals)
Environmental specifications
International safety standards 
ce.gifctick.gifeac.gifkc.giful508.gif
Surrounding air temperature 
0 to 55 °C [32 to 131 °F]
Storage temperature 
-20 to +60 °C [-4 to 140 °F]
Ambient humidity 
10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity 
10 to 90 % RH (Wet bulb temperature : 39 °C [102.2 °F] max. - no condensation)
Dust 
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree 
For use in Pollution Degree 2 environment
Corrosive gases 
Free of corrosive gases
Air pressure (altitude range) 
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance 
IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration : 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion resistance 
IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Noise immunity 
Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)
Electrostatic discharge immunity 
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Memory
Application memory 
FLASH EPROM 32 MB (including a logic program area)
Data backup 
SRAM 320 KB (Replaceable Lithium battery for backup memory)
Logic program area 
FLASH EPROM 132 KB (Equivalent to 15,000 steps)*2
Variable area 
SRAM 64 KB (Replaceable Lithium battery for backup memory)
Clock accuracy 
±65 sec./month (deviation at room temperature and power is OFF)*3

2Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.

3Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

Interface specifications
Serial (COM1) 
Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Parity: None, Odd or Even, Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 bps to 115,200 bps, Connector: D-Sub9 (plug)
Serial (COM2) 
Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Parity: None, Odd or Even, Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub9 (plug)
USB (Type A) 
Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less
USB (mini-B) 
Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less
Ethernet 
IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1
SD card 
SD Card Slot x 1
Structural specifications
Grounding 
Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Cooling method 
Natural air circulation
Structure 
IP20*4
External dimensions 
W275.8 x H206.8 x D59.8 mm
Panel cut-out dimensions 
Standard Mount: W249.6 x H188.1 mm [W9.83 x H7.41 in.]
Flat Mount: W289.4 x H214.4 mm [W11.39 x H8.44 in.]*5
Weight 
2.8 kg [6.18 lb] or less

4Protection structure equivalent to IP67F can be expected if you affix the Overlay (sold separately) on the screen of the GP unit and the surroundings. Pro-face does not guarantee the protective structure. Consider the the protective structure in combination with a panel or a resin plate within your quality assurance range. For details, please refer to GP4000 Series Hardware Manual.

5As for dimensional tolerance everything +0.5/-0 mm (+0.02/-0 in.) and R in angle are below R1 (R0.04in.).

Dimensions
External dimensions 

Panel Type/Standard Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit
 
 
4601r_panel_stan_vert_dim.png
 
Installation with Installation Fasteners attached to the sides of the GP unit
 
 
4601r_panel_stan_horiz_dim.png
 

Panel Type/Flat Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit
 
 
4601r_panel_flat_vert_dim.png
 
Installation with Installation Fasteners attached to the sides of the GP unit
 
 
4601r_panel_flat_horiz_dim.png
 

Resin Boss Type/Standard Mount, Flat Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit
 
 
4601r_resin_stan_vert_dim.png
 
Installation with Installation Fasteners attached to the sides of the GP unit
 
 
4601r_resin_stan_horiz_dim.png
Panel cut-out dimensions 

Standard Mount (Panel Type/Resin Boss Type)

 
rear_mount_panelcut.jpg
a) Installation positions of stud bolts or positions of boss molds when attaching installation brackets at the top and bottom surfaces of the GP unit
b) Installation positions of stud bolts or positions of boss molds when attaching installation brackets on either side of the GP unit
d) 4-M4 x 10L stud bolts (no foreign material present on the base due to sparking or similar phenomena) or boss molds
e) Center of the display area
 
A B C R
Panel Type *1 Resin Boss Type *2
249.6mm (+0.5, -0mm) (9.83in. [+0.02, -0in.]) 188.1mm (+0.5, -0mm) (7.41in. [+0.02, -0in.]) 1.6mm (0.06in.) to 3.2mm (0.13in.) (SPCC "JIS G3141" or SECC "JIS G3313")

1.5mm (0.06in.) to 6mm (0.24in.) (SUS304 "JIS G4304, JIS G4305")
2mm (0.08in.) or more 1mm (0.04in.) maximum
Note: If you are designing the panel with a material other than sheet metal, ensure that the material has sufficient strength.

*1 Panel type: Weld the stud bolts to the panel, and then tighten the nuts to fasten the GP unit to the panel.
*2 Resin boss type: Tighten the screws to attach the GP unit to the bosses of the resin boss-molded product.
 
Attaching Installation Brackets
on the Top and Bottom Surfaces of the GP Unit
Attaching Installation Brackets
on the Sides of the GP Unit
X1 Y1 X2 Y2
75.5 (±0.15)
[2.97, (±0.01)]
121.8 (±0.15)
[4.80, (±0.01)]
158.8 (±0.15)
[6.25, (±0.01)]
75.5 (±0.15)
[2.97, (±0.01)]
Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.

Flat Mount (Panel Type/Resin Boss Type)

 
rear_mount_panelcut2.jpg
a) Installation positions of stud bolts or positions of boss molds when attaching installation brackets at the top and bottom surfaces of the GP unit
b) Installation positions of stud bolts or positions of boss molds when attaching installation brackets on either side of the GP unit
d) 4-M4 x 10L stud bolts (no foreign material present on the base due to sparking or similar phenomena) or boss molds
e) Center of the display area
 
A B C R
A1 A2 Panel Type *1 Resin Boss Type *2
289.4mm (+0.5, -0mm)
(11.39in.[+0.02, -0in.])
214.4mm (+0.5,
-0mm) (8.44in. [+0.02, -0in.])
1.6 mm (0.06in.) (SPCC "JIS G3141" or SECC "JIS G3313")

1.5 mm (0.06in.) (SUS304 "JIS G4304, JIS G4305")
2 mm (0.08in.) maximum 1 mm (0.04in.) maximum
142.4mm (+0.25,
-0mm) (5.61in. [+0.01, -0in.])
147mm (+0.25,
-0mm) (5.79in. [+0.01, -0in.])
Note: If you are designing the panel with a material other than sheet metal, ensure that the material has sufficient strength.

*1 Panel type: Weld the stud bolts to the panel, and then tighten the nuts to fasten the GP unit to the panel.
*2 Resin boss type: Tighten the screws to attach the GP unit to the bosses of the resin boss-molded product.
 
Attaching Installation Brackets
on the Top and Bottom Surfaces of the GP Unit
Attaching Installation Brackets
on the Sides of the GP Unit
X1 Y1 X2 Y2
75.5 (±0.15)
[2.97, (±0.01)]
121.8 (±0.15)
[4.80, (±0.01)]
158.8 (±0.15)
[6.25, (±0.01)]
75.5 (±0.15)
[2.97, (±0.01)]
Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.
External dimensions with cable 

Panel Type (Standard, Flat Mount) / Resin Boss Type (Standard Mount)

 
 
4601r_cable_dim.png
NOTE: All the above values are designed with cable bending in mind. The dimensions given here are representative values depending on the type of connection cable in use. Therefore, these values are intended for reference only.
 

Bình luận

Sản phẩm cùng loại

Proface PFXGP4311HTADERK

Hotline: 0946.733.151

PFXGP4501TADW

Hotline: 0946.733.151

Proface PFXGP4311HTADEYK

Hotline: 0946.733.151

Proface PFXGP4311HTAD

Hotline: 0946.733.151

PFXGP4401TAD

Hotline: 0946.733.151

PFXGP4601TAD

Hotline: 0946.733.151

PFXGP4301TADW

Hotline: 0946.733.151

Proface PFXGP4501TADR

Hotline: 0946.733.151

PFXGP4603TAD

Hotline: 0946.733.151

PFXGP4401WADW

Hotline: 0946.733.151

Màn hình Proface PFXGP4402WADW

Hotline: 0946.733.151

PFXGP4501TAA

Hotline: 0946.733.151

Công ty TNHH Kỹ Thuật Điện Hiệp Lực                                                        Website:  www.dhlvn.com
Chi nhánh TPHCM: 32/1 Lê Văn Huân F13 Q.Tân Bình TPHCM                                      
www.profacevn.com.vn

Chi nhánh HN : 560 Nguyễn Văn Cừ, P. Gia Thụy Q. Long Biên                                     www.sieuthidientudonghoa.com

Hotline: 0946.733.151                                                                                              www.curoavn.com
Mail: dhl0946733151@gmail.com                                                                     Blog:  www.profacedhl.blogspot.com
Skype: proface.hlc.sales2                                                                          Fanpage:  www.facebook.com/profacevn